Total
20 CVE
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2024-0387 | 2024-06-04 | 6.5 Medium | ||
| The EDS-4000/G4000 Series prior to version 3.2 includes IP forwarding capabilities that users cannot deactivate. An attacker may be able to send requests to the product and have it forwarded to the target. An attacker can bypass access controls or hide the source of malicious requests. | ||||
| CVE-2024-34068 | 2024-06-04 | 6.4 Medium | ||
| Pterodactyl wings is the server control plane for Pterodactyl Panel. An authenticated user who has access to a game server is able to bypass the previously implemented access control (GHSA-6rg3-8h8x-5xfv) that prevents accessing internal endpoints of the node hosting Wings in the pull endpoint. This would allow malicious users to potentially access resources on local networks that would otherwise be inaccessible. This issue has been addressed in version 1.11.2 and users are advised to upgrade. Users unable to upgrade may enable the `api.disable_remote_download` option as a workaround. | ||||
| CVE-2020-26262 | 2 Coturn Project, Fedoraproject | 2 Coturn, Fedora | 2023-11-07 | 7.2 High |
| Coturn is free open source implementation of TURN and STUN Server. Coturn before version 4.5.2 by default does not allow peers to connect and relay packets to loopback addresses in the range of `127.x.x.x`. However, it was observed that when sending a `CONNECT` request with the `XOR-PEER-ADDRESS` value of `0.0.0.0`, a successful response was received and subsequently, `CONNECTIONBIND` also received a successful response. Coturn then is able to relay packets to the loopback interface. Additionally, when coturn is listening on IPv6, which is default, the loopback interface can also be reached by making use of either `[::1]` or `[::]` as the peer address. By using the address `0.0.0.0` as the peer address, a malicious user will be able to relay packets to the loopback interface, unless `--denied-peer-ip=0.0.0.0` (or similar) has been specified. Since the default configuration implies that loopback peers are not allowed, coturn administrators may choose to not set the `denied-peer-ip` setting. The issue patched in version 4.5.2. As a workaround the addresses in the address block `0.0.0.0/8`, `[::1]` and `[::]` should be denied by default unless `--allow-loopback-peers` has been specified. | ||||
| CVE-2019-3996 | 2 Elog Project, Fedoraproject | 2 Elog, Fedora | 2023-11-07 | 6.5 Medium |
| ELOG 3.1.4-57bea22 and below can be used as an HTTP GET request proxy when unauthenticated remote attackers send crafted HTTP POST requests. | ||||
| CVE-2018-12182 | 1 Tianocore | 1 Edk Ii | 2023-11-07 | N/A |
| Insufficient memory write check in SMM service for EDK II may allow an authenticated user to potentially enable escalation of privilege, information disclosure and/or denial of service via local access. | ||||
| CVE-2021-20042 | 1 Sonicwall | 10 Sma 200, Sma 200 Firmware, Sma 210 and 7 more | 2023-06-26 | 9.8 Critical |
| An unauthenticated remote attacker can use SMA 100 as an unintended proxy or intermediary undetectable proxy to bypass firewall rules. This vulnerability affected SMA 200, 210, 400, 410 and 500v appliances. | ||||
| CVE-2023-33188 | 1 Omninotes | 1 Omni Notes | 2023-06-02 | 5.5 Medium |
| Omni-notes is an open source note-taking application for Android. The Omni-notes Android app had an insufficient path validation vulnerability when displaying the details of a note received through an externally-provided intent. The paths of the note's attachments were not properly validated, allowing malicious or compromised applications in the same device to force Omni-notes to copy files from its internal storage to its external storage directory, where they would have become accessible to any component with permission to read the external storage. Updating to the newest version (6.2.7) of Omni-notes Android fixes this vulnerability. | ||||
| CVE-2022-39349 | 1 Tasks | 1 Tasks | 2022-10-28 | 5.5 Medium |
| The Tasks.org Android app is an open-source app for to-do lists and reminders. The Tasks.org app uses the activity `ShareLinkActivity.kt` to handle "share" intents coming from other components in the same device and convert them to tasks. Those intents may contain arbitrary file paths as attachments, in which case the files pointed by those paths are copied in the app's external storage directory. Prior to versions 12.7.1 and 13.0.1, those paths were not validated, allowing a malicious or compromised application in the same device to force Tasks.org to copy files from its internal storage to its external storage directory, where they became accessible to any component with permission to read the external storage. This vulnerability can lead to sensitive information disclosure. All information in the user's notes and the app's preferences, including the encrypted credentials of CalDav integrations if enabled, could be accessed by third party applications installed on the same device. This issue was fixed in versions 12.7.1 and 13.0.1. There are no known workarounds. | ||||
| CVE-2022-39361 | 1 Metabase | 1 Metabase | 2022-10-28 | 8.8 High |
| Metabase is data visualization software. Prior to versions 0.44.5, 1.44.5, 0.43.7, 1.43.7, 0.42.6, 1.42.6, 0.41.9, and 1.41.9, H2 (Sample Database) could allow Remote Code Execution (RCE), which can be abused by users able to write SQL queries on H2 databases. This issue is patched in versions 0.44.5, 1.44.5, 0.43.7, 1.43.7, 0.42.6, 1.42.6, 0.41.9, and 1.41.9. Metabase no longer allows DDL statements in H2 native queries. | ||||
| CVE-2018-1999038 | 1 Jenkins | 1 Publish Over Cifs | 2022-10-03 | N/A |
| A confused deputy vulnerability exists in Jenkins Publisher Over CIFS Plugin 0.10 and earlier in CifsPublisherPluginDescriptor.java that allows attackers to have Jenkins connect to an attacker specified CIFS server with attacker specified credentials. | ||||
| CVE-2015-10003 | 1 Filezilla-project | 1 Filezilla Server | 2022-07-25 | 4.3 Medium |
| A vulnerability, which was classified as problematic, was found in FileZilla Server up to 0.9.50. This affects an unknown part of the component PORT Handler. The manipulation leads to unintended intermediary. It is possible to initiate the attack remotely. Upgrading to version 0.9.51 is able to address this issue. It is recommended to upgrade the affected component. | ||||
| CVE-2020-8561 | 1 Kubernetes | 1 Kubernetes | 2021-11-06 | 4.1 Medium |
| A security issue was discovered in Kubernetes where actors that control the responses of MutatingWebhookConfiguration or ValidatingWebhookConfiguration requests are able to redirect kube-apiserver requests to private networks of the apiserver. If that user can view kube-apiserver logs when the log level is set to 10, they can view the redirected responses and headers in the logs. | ||||
| CVE-2021-25740 | 1 Kubernetes | 1 Kubernetes | 2021-11-06 | 3.1 Low |
| A security issue was discovered with Kubernetes that could enable users to send network traffic to locations they would otherwise not have access to via a confused deputy attack. | ||||
| CVE-2021-32783 | 1 Projectcontour | 1 Contour | 2021-08-05 | 8.5 High |
| Contour is a Kubernetes ingress controller using Envoy proxy. In Contour before version 1.17.1 a specially crafted ExternalName type Service may be used to access Envoy's admin interface, which Contour normally prevents from access outside the Envoy container. This can be used to shut down Envoy remotely (a denial of service), or to expose the existence of any Secret that Envoy is using for its configuration, including most notably TLS Keypairs. However, it *cannot* be used to get the *content* of those secrets. Since this attack allows access to the administration interface, a variety of administration options are available, such as shutting down the Envoy or draining traffic. In general, the Envoy admin interface cannot easily be used for making changes to the cluster, in-flight requests, or backend services, but it could be used to shut down or drain Envoy, change traffic routing, or to retrieve secret metadata, as mentioned above. The issue will be addressed in Contour v1.18.0 and a cherry-picked patch release, v1.17.1, has been released to cover users who cannot upgrade at this time. For more details refer to the linked GitHub Security Advisory. | ||||
| CVE-2021-32773 | 1 Racket-lang | 1 Racket | 2021-07-29 | 7.5 High |
| Racket is a general-purpose programming language and an ecosystem for language-oriented programming. In versions prior to 8.2, code evaluated using the Racket sandbox could cause system modules to incorrectly use attacker-created modules instead of their intended dependencies. This could allow system functions to be controlled by the attacker, giving access to facilities intended to be restricted. This problem is fixed in Racket version 8.2. A workaround is available, depending on system settings. For systems that provide arbitrary Racket evaluation, external sandboxing such as containers limit the impact of the problem. For multi-user evaluation systems, such as the `handin-server` system, it is not possible to work around this problem and upgrading is required. | ||||
| CVE-2020-5412 | 1 Vmware | 1 Spring Cloud Netflix | 2020-08-11 | 6.5 Medium |
| Spring Cloud Netflix, versions 2.2.x prior to 2.2.4, versions 2.1.x prior to 2.1.6, and older unsupported versions allow applications to use the Hystrix Dashboard proxy.stream endpoint to make requests to any server reachable by the server hosting the dashboard. A malicious user, or attacker, can send a request to other servers that should not be exposed publicly. | ||||
| CVE-2019-3924 | 1 Mikrotik | 1 Routeros | 2019-10-09 | N/A |
| MikroTik RouterOS before 6.43.12 (stable) and 6.42.12 (long-term) is vulnerable to an intermediary vulnerability. The software will execute user defined network requests to both WAN and LAN clients. A remote unauthenticated attacker can use this vulnerability to bypass the router's firewall or for general network scanning activities. | ||||
| CVE-2019-1841 | 1 Cisco | 1 Dna Center | 2019-10-09 | N/A |
| A vulnerability in the Software Image Management feature of Cisco DNA Center could allow an authenticated, remote attacker to access to internal services without additional authentication. The vulnerability is due to insufficient validation of user-supplied input. An attacker could exploit this vulnerability by sending arbitrary HTTP requests to internal services. An exploit could allow the attacker to bypass any firewall or other protections to access unauthorized internal services. DNAC versions prior to 1.2.5 are affected. | ||||
| CVE-2018-16598 | 1 Amazon | 2 Amazon Web Services Freertos, Freertos | 2019-01-04 | N/A |
| An issue was discovered in Amazon Web Services (AWS) FreeRTOS through 1.3.1, FreeRTOS up to V10.0.1 (with FreeRTOS+TCP), and WITTENSTEIN WHIS Connect middleware TCP/IP component. In xProcessReceivedUDPPacket and prvParseDNSReply, any received DNS response is accepted, without confirming it matches a sent DNS request. | ||||
| CVE-2015-2947 | 1 Grabacr.net | 1 Kancolleviewer | 2017-04-25 | N/A |
| KanColleViewer versions 3.8.1 and earlier operates as an open proxy which allows remote attackers to trigger outbound network traffic. | ||||
Page 1 of 1.