Total
542 CVE
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2019-13528 | 1 Tridium | 7 Edge 10, Jace-8000, Jace 3e and 4 more | 2020-10-16 | 4.4 Medium |
| A specific utility may allow an attacker to gain read access to privileged files in the Niagara AX 3.8u4 (JACE 3e, JACE 6e, JACE 7, JACE-8000), Niagara 4.4u3 (JACE 3e, JACE 6e, JACE 7, JACE-8000), and Niagara 4.7u1 (JACE-8000, Edge 10). | ||||
| CVE-2019-1859 | 1 Cisco | 228 Sf200-24, Sf200-24 Firmware, Sf200-24fp and 225 more | 2020-10-13 | 7.2 High |
| A vulnerability in the Secure Shell (SSH) authentication process of Cisco Small Business Switches software could allow an attacker to bypass client-side certificate authentication and revert to password authentication. The vulnerability exists because OpenSSH mishandles the authentication process. An attacker could exploit this vulnerability by attempting to connect to the device via SSH. A successful exploit could allow the attacker to access the configuration as an administrative user if the default credentials are not changed. There are no workarounds available; however, if client-side certificate authentication is enabled, disable it and use strong password authentication. Client-side certificate authentication is disabled by default. | ||||
| CVE-2019-13554 | 1 Ge | 1 Mark Vie Control System | 2020-10-09 | 8.8 High |
| GE Mark VIe Controller has an unsecured Telnet protocol that may allow a user to create an authenticated session using generic default credentials. GE recommends that users disable the Telnet service. | ||||
| CVE-2019-14883 | 1 Moodle | 1 Moodle | 2020-10-09 | 5.3 Medium |
| A vulnerability was found in Moodle 3.6 before 3.6.7 and 3.7 before 3.7.3, where tokens used to fetch inline atachments in email notifications were not disabled when a user's account was no longer active. Note: to access files, a user would need to know the file path, and their token. | ||||
| CVE-2019-15610 | 1 Nextcloud | 1 Circles | 2020-10-09 | 4.3 Medium |
| Improper authorization in the Circles app 0.17.7 causes retaining access when an email address was removed from a circle. | ||||
| CVE-2019-7479 | 1 Sonicwall | 2 Sonicos, Sonicosv | 2020-10-09 | 7.2 High |
| A vulnerability in SonicOS allow authenticated read-only admin can elevate permissions to configuration mode. This vulnerability affected SonicOS Gen 5 version 5.9.1.12-4o and earlier, Gen 6 version 6.2.7.4-32n, 6.5.1.4-4n, 6.5.2.3-4n, 6.5.3.3-3n, 6.2.7.10-3n, 6.4.1.0-3n, 6.5.3.3-3n, 6.5.1.9-4n and SonicOSv 6.5.0.2-8v_RC363 (VMWARE), 6.5.0.2.8v_RC367 (AZURE), SonicOSv 6.5.0.2.8v_RC368 (AWS), SonicOSv 6.5.0.2.8v_RC366 (HYPER_V). | ||||
| CVE-2019-1603 | 1 Cisco | 6 Nexus 3000, Nexus 3500, Nexus 3600 and 3 more | 2020-10-08 | 7.8 High |
| A vulnerability in the CLI of Cisco NX-OS Software could allow an authenticated, local attacker to escalate lower-level privileges to the administrator level. The vulnerability is due to insufficient authorization enforcement. An attacker could exploit this vulnerability by authenticating to the targeted device and executing commands that could lead to elevated privileges. A successful exploit could allow an attacker to make configuration changes to the system as administrator. Nexus 3000 Series Switches are affected in versions prior to 7.0(3)I7(4). Nexus 3500 Platform Switches are affected in versions prior to 7.0(3)I7(4). Nexus 3600 Platform Switches are affected in versions prior to 7.0(3)F3(5). Nexus 9000 Series Switches-Standalone are affected in versions prior to 7.0(3)I7(4). Nexus 9500 R-Series Line Cards and Fabric Modules are affected in versions prior to 7.0(3)F3(5). | ||||
| CVE-2019-12635 | 1 Cisco | 1 Content Security Management Appliance | 2020-10-08 | 4.3 Medium |
| A vulnerability in the authorization module of Cisco Content Security Management Appliance (SMA) Software could allow an authenticated, remote attacker to gain out-of-scope access to email. The vulnerability exists because the affected software does not correctly implement role permission controls. An attacker could exploit this vulnerability by using a custom role with specific permissions. A successful exploit could allow the attacker to access the spam quarantine of other users. | ||||
| CVE-2019-13416 | 1 Search-guard | 1 Search Guard | 2020-10-08 | 6.5 Medium |
| Search Guard versions before 24.3 had an issue when Cross Cluster Search (CCS) was enabled, authenticated users are always authorized on the local cluster ignoring their roles on the remote cluster(s). | ||||
| CVE-2019-6582 | 1 Siemens | 5 Siveillance Video Management Software 2017 R2, Siveillance Video Management Software 2018 R1, Siveillance Video Management Software 2018 R2 and 2 more | 2020-10-06 | 7.1 High |
| A vulnerability has been identified in Siveillance VMS 2017 R2 (All versions < V11.2a), Siveillance VMS 2018 R1 (All versions < V12.1a), Siveillance VMS 2018 R2 (All versions < V12.2a), Siveillance VMS 2018 R3 (All versions < V12.3a), Siveillance VMS 2019 R1 (All versions < V13.1a). An attacker with network access to port 80/TCP can change user-defined event properties without proper authorization. The security vulnerability could be exploited by an authenticated attacker with network access to the affected service. No user interaction is required to exploit this security vulnerability. Successful exploitation compromises integrity of the user-defined event properties and the availability of corresponding functionality. At the time of advisory publication no public exploitation of this security vulnerability was known. | ||||
| CVE-2019-1604 | 1 Cisco | 8 Nexus 3000, Nexus 3500, Nexus 3600 and 5 more | 2020-10-05 | 7.8 High |
| A vulnerability in the user account management interface of Cisco NX-OS Software could allow an authenticated, local attacker to gain elevated privileges on an affected device. The vulnerability is due to an incorrect authorization check of user accounts and their associated Group ID (GID). An attacker could exploit this vulnerability by taking advantage of a logic error that will permit the use of higher privileged commands than what is necessarily assigned. A successful exploit could allow an attacker to execute commands with elevated privileges on the underlying Linux shell of an affected device. Nexus 7000 and 7700 Series Switches are affected in versions prior to 6.2(22), 8.2(3), and 8.3(2). Nexus 3000 Series Switches are affected in versions prior to 7.0(3)I7(4). Nexus 3500 Platform Switches are affected in versions prior to 7.0(3)I7(4). Nexus 3600 Platform Switches are affected in versions prior to 7.0(3)F3(5). Nexus 9000 Series Switches-Standalone are affected in versions prior to 7.0(3)I7(4). Nexus 9500 R-Series Line Cards and Fabric Modules are affected in versions prior to 7.0(3)F3(5). | ||||
| CVE-2019-10154 | 1 Moodle | 1 Moodle | 2020-09-30 | 7.5 High |
| A flaw was found in Moodle before versions 3.7, 3.6.4. A web service fetching messages was not restricted to the current user's conversations. | ||||
| CVE-2020-16096 | 1 Gallagher | 1 Command Centre | 2020-09-24 | 7.7 High |
| In Gallagher Command Centre versions 8.10 prior to 8.10.1134(MR4), 8.00 prior to 8.00.1161(MR5), 7.90 prior to 7.90.991(MR5), 7.80 prior to 7.80.960(MR2), 7.70 and earlier, any operator account has access to all data that would be replicated if the system were to be (or is) attached to a multi-server environment. This can include plain text credentials for DVR systems and card details used for physical access/alarm/perimeter components. | ||||
| CVE-2020-3394 | 1 Cisco | 65 Nexus 3016, Nexus 3048, Nexus 3064 and 62 more | 2020-09-09 | 7.8 High |
| A vulnerability in the Enable Secret feature of Cisco Nexus 3000 Series Switches and Cisco Nexus 9000 Series Switches in standalone NX-OS mode could allow an authenticated, local attacker to issue the enable command and get full administrative privileges. To exploit this vulnerability, the attacker would need to have valid credentials for the affected device. The vulnerability is due to a logic error in the implementation of the enable command. An attacker could exploit this vulnerability by logging in to the device and issuing the enable command. A successful exploit could allow the attacker to gain full administrative privileges without using the enable password. Note: The Enable Secret feature is disabled by default. | ||||
| CVE-2018-15405 | 1 Cisco | 1 Ucs Director | 2020-08-31 | 6.5 Medium |
| A vulnerability in the web interface for specific feature sets of Cisco Integrated Management Controller (IMC) Supervisor and Cisco UCS Director could allow an authenticated, remote attacker to access sensitive information. The vulnerability is due to an authorization check that does not properly include the access level of the web interface user. An attacker who has valid application credentials could exploit this vulnerability by sending a crafted HTTP request to the web interface. A successful exploit could allow the attacker to view sensitive information that belongs to other users. The attacker could then use this information to conduct additional reconnaissance attacks. | ||||
| CVE-2020-7583 | 1 Siemens | 1 Automation License Manager | 2020-08-21 | 7.8 High |
| A vulnerability has been identified in Automation License Manager 5 (All versions), Automation License Manager 6 (All versions < V6.0.8). The application does not properly validate the users' privileges when executing some operations, which could allow a user with low permissions to arbitrary modify files that should be protected against writing. | ||||
| CVE-2017-12160 | 1 Redhat | 1 Keycloak | 2020-08-19 | 7.2 High |
| It was found that Keycloak oauth would permit an authenticated resource to obtain an access/refresh token pair from the authentication server, permitting indefinite usage in the case of permission revocation. An attacker on an already compromised resource could use this flaw to grant himself continued permissions and possibly conduct further attacks. | ||||
| CVE-2016-1000219 | 1 Elastic | 1 Kibana | 2020-08-14 | N/A |
| Kibana before 4.5.4 and 4.1.11 when a custom output is configured for logging in, cookies and authorization headers could be written to the log files. This information could be used to hijack sessions of other users when using Kibana behind some form of authentication such as Shield. | ||||
| CVE-2020-3374 | 1 Cisco | 1 Sd-wan | 2020-08-06 | 9.9 Critical |
| A vulnerability in the web-based management interface of Cisco SD-WAN vManage Software could allow an authenticated, remote attacker to bypass authorization, enabling them to access sensitive information, modify the system configuration, or impact the availability of the affected system. The vulnerability is due to insufficient authorization checking on the affected system. An attacker could exploit this vulnerability by sending crafted HTTP requests to the web-based management interface of an affected system. A successful exploit could allow the attacker to gain privileges beyond what would normally be authorized for their configured user authorization level. The attacker may be able to access sensitive information, modify the system configuration, or impact the availability of the affected system. | ||||
| CVE-2020-3386 | 1 Cisco | 1 Data Center Network Manager | 2020-08-05 | 8.8 High |
| A vulnerability in the REST API endpoint of Cisco Data Center Network Manager (DCNM) could allow an authenticated, remote attacker with a low-privileged account to bypass authorization on the API of an affected device. The vulnerability is due to insufficient authorization of certain API functions. An attacker could exploit this vulnerability by sending a crafted request to the API using low-privileged credentials. A successful exploit could allow the attacker to perform arbitrary actions through the REST API with administrative privileges. | ||||