Total
59 CVE
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2022-25152 | 1 Itarian | 2 On-premise, Saas Service Desk | 2024-06-20 | 8.8 High |
| The ITarian platform (SAAS / on-premise) offers the possibility to run code on agents via a function called procedures. It is possible to require a mandatory approval process. Due to a vulnerability in the approval process, present in any version prior to 6.35.37347.20040, a malicious actor (with a valid session token) can create a procedure, bypass approval, and execute the procedure. This results in the ability for any user with a valid session token to perform arbitrary code execution and full system take-over on all agents. | ||||
| CVE-2024-23592 | 2024-04-08 | 6.3 Medium | ||
| An authentication bypass vulnerability was reported in Lenovo devices with Synaptics fingerprint readers that could allow an attacker with physical access to replay fingerprints and bypass Windows Hello authentication. | ||||
| CVE-2023-2585 | 1 Redhat | 6 Enterprise Linux, Openshift Container Platform, Openshift Container Platform For Ibm Z and 3 more | 2024-01-02 | 8.1 High |
| Keycloak's device authorization grant does not correctly validate the device code and client ID. An attacker client could abuse the missing validation to spoof a client consent request and trick an authorization admin into granting consent to a malicious OAuth client or possible unauthorized access to an existing OAuth client. | ||||
| CVE-2021-42017 | 1 Siemens | 54 Ruggedcom I800, Ruggedcom I801, Ruggedcom I802 and 51 more | 2023-12-12 | 5.9 Medium |
| A vulnerability has been identified in RUGGEDCOM i800, RUGGEDCOM i801, RUGGEDCOM i802, RUGGEDCOM i803, RUGGEDCOM M2100, RUGGEDCOM M2100F, RUGGEDCOM M2200, RUGGEDCOM M2200F, RUGGEDCOM M969, RUGGEDCOM M969F, RUGGEDCOM RMC30, RUGGEDCOM RMC8388 V4.X, RUGGEDCOM RMC8388 V5.X, RUGGEDCOM RP110, RUGGEDCOM RS1600, RUGGEDCOM RS1600F, RUGGEDCOM RS1600T, RUGGEDCOM RS400, RUGGEDCOM RS400F, RUGGEDCOM RS401, RUGGEDCOM RS416, RUGGEDCOM RS416F, RUGGEDCOM RS416P, RUGGEDCOM RS416PF, RUGGEDCOM RS416Pv2 V4.X, RUGGEDCOM RS416Pv2 V5.X, RUGGEDCOM RS416v2 V4.X, RUGGEDCOM RS416v2 V5.X, RUGGEDCOM RS8000, RUGGEDCOM RS8000A, RUGGEDCOM RS8000H, RUGGEDCOM RS8000T, RUGGEDCOM RS900, RUGGEDCOM RS900 (32M) V4.X, RUGGEDCOM RS900 (32M) V5.X, RUGGEDCOM RS900F, RUGGEDCOM RS900G, RUGGEDCOM RS900G (32M) V4.X, RUGGEDCOM RS900G (32M) V5.X, RUGGEDCOM RS900GF, RUGGEDCOM RS900GP, RUGGEDCOM RS900GPF, RUGGEDCOM RS900L, RUGGEDCOM RS900M-GETS-C01, RUGGEDCOM RS900M-GETS-XX, RUGGEDCOM RS900M-STND-C01, RUGGEDCOM RS900M-STND-XX, RUGGEDCOM RS900W, RUGGEDCOM RS910, RUGGEDCOM RS910L, RUGGEDCOM RS910W, RUGGEDCOM RS920L, RUGGEDCOM RS920W, RUGGEDCOM RS930L, RUGGEDCOM RS930W, RUGGEDCOM RS940G, RUGGEDCOM RS940GF, RUGGEDCOM RS969, RUGGEDCOM RSG2100, RUGGEDCOM RSG2100 (32M) V4.X, RUGGEDCOM RSG2100 (32M) V5.X, RUGGEDCOM RSG2100F, RUGGEDCOM RSG2100P, RUGGEDCOM RSG2100PF, RUGGEDCOM RSG2200, RUGGEDCOM RSG2200F, RUGGEDCOM RSG2288 V4.X, RUGGEDCOM RSG2288 V5.X, RUGGEDCOM RSG2300 V4.X, RUGGEDCOM RSG2300 V5.X, RUGGEDCOM RSG2300F, RUGGEDCOM RSG2300P V4.X, RUGGEDCOM RSG2300P V5.X, RUGGEDCOM RSG2300PF, RUGGEDCOM RSG2488 V4.X, RUGGEDCOM RSG2488 V5.X, RUGGEDCOM RSG2488F, RUGGEDCOM RSG907R, RUGGEDCOM RSG908C, RUGGEDCOM RSG909R, RUGGEDCOM RSG910C, RUGGEDCOM RSG920P V4.X, RUGGEDCOM RSG920P V5.X, RUGGEDCOM RSL910, RUGGEDCOM RST2228, RUGGEDCOM RST2228P, RUGGEDCOM RST916C, RUGGEDCOM RST916P. A new variant of the POODLE attack has left a third-party component vulnerable due to the implementation flaws of the CBC encryption mode in TLS 1.0 to 1.2. If an attacker were to exploit this, they could act as a man-in-the-middle and eavesdrop on encrypted communications. | ||||
| CVE-2017-15706 | 1 Apache | 1 Tomcat | 2023-12-08 | N/A |
| As part of the fix for bug 61201, the documentation for Apache Tomcat 9.0.0.M22 to 9.0.1, 8.5.16 to 8.5.23, 8.0.45 to 8.0.47 and 7.0.79 to 7.0.82 included an updated description of the search algorithm used by the CGI Servlet to identify which script to execute. The update was not correct. As a result, some scripts may have failed to execute as expected and other scripts may have been executed unexpectedly. Note that the behaviour of the CGI servlet has remained unchanged in this regard. It is only the documentation of the behaviour that was wrong and has been corrected. | ||||
| CVE-2021-3448 | 4 Fedoraproject, Oracle, Redhat and 1 more | 4 Fedora, Communications Cloud Native Core Network Function Cloud Native Environment, Enterprise Linux and 1 more | 2023-11-07 | 4.0 Medium |
| A flaw was found in dnsmasq in versions before 2.85. When configured to use a specific server for a given network interface, dnsmasq uses a fixed port while forwarding queries. An attacker on the network, able to find the outgoing port used by dnsmasq, only needs to guess the random transmission ID to forge a reply and get it accepted by dnsmasq. This flaw makes a DNS Cache Poisoning attack much easier. The highest threat from this vulnerability is to data integrity. | ||||
| CVE-2021-34791 | 1 Cisco | 19 Adaptive Security Appliance, Adaptive Security Appliance Software, Asa 5505 and 16 more | 2023-11-07 | 5.3 Medium |
| Multiple vulnerabilities in the Application Level Gateway (ALG) for the Network Address Translation (NAT) feature of Cisco Adaptive Security Appliance (ASA) Software and Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to bypass the ALG and open unauthorized connections with a host located behind the ALG. For more information about these vulnerabilities, see the Details section of this advisory. Note: These vulnerabilities have been publicly discussed as NAT Slipstreaming. | ||||
| CVE-2021-34790 | 1 Cisco | 19 Adaptive Security Appliance, Adaptive Security Appliance Software, Asa 5505 and 16 more | 2023-11-07 | 5.3 Medium |
| Multiple vulnerabilities in the Application Level Gateway (ALG) for the Network Address Translation (NAT) feature of Cisco Adaptive Security Appliance (ASA) Software and Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to bypass the ALG and open unauthorized connections with a host located behind the ALG. For more information about these vulnerabilities, see the Details section of this advisory. Note: These vulnerabilities have been publicly discussed as NAT Slipstreaming. | ||||
| CVE-2020-7251 | 1 Mcafee | 1 Endpoint Security | 2023-11-07 | 5.5 Medium |
| Improper access control vulnerability in Configuration Tool in McAfee Mcafee Endpoint Security (ENS) Prior to 10.6.1 February 2020 Update allows local users to disable security features via unauthorised use of the configuration tool from older versions of ENS. | ||||
| CVE-2020-25686 | 4 Arista, Debian, Fedoraproject and 1 more | 4 Eos, Debian Linux, Fedora and 1 more | 2023-11-07 | 3.7 Low |
| A flaw was found in dnsmasq before version 2.83. When receiving a query, dnsmasq does not check for an existing pending request for the same name and forwards a new request. By default, a maximum of 150 pending queries can be sent to upstream servers, so there can be at most 150 queries for the same name. This flaw allows an off-path attacker on the network to substantially reduce the number of attempts that it would have to perform to forge a reply and have it accepted by dnsmasq. This issue is mentioned in the "Birthday Attacks" section of RFC5452. If chained with CVE-2020-25684, the attack complexity of a successful attack is reduced. The highest threat from this vulnerability is to data integrity. | ||||
| CVE-2020-25684 | 4 Arista, Debian, Fedoraproject and 1 more | 4 Eos, Debian Linux, Fedora and 1 more | 2023-11-07 | 3.7 Low |
| A flaw was found in dnsmasq before version 2.83. When getting a reply from a forwarded query, dnsmasq checks in the forward.c:reply_query() if the reply destination address/port is used by the pending forwarded queries. However, it does not use the address/port to retrieve the exact forwarded query, substantially reducing the number of attempts an attacker on the network would have to perform to forge a reply and get it accepted by dnsmasq. This issue contrasts with RFC5452, which specifies a query's attributes that all must be used to match a reply. This flaw allows an attacker to perform a DNS Cache Poisoning attack. If chained with CVE-2020-25685 or CVE-2020-25686, the attack complexity of a successful attack is reduced. The highest threat from this vulnerability is to data integrity. | ||||
| CVE-2020-1728 | 2 Quarkus, Redhat | 2 Quarkus, Keycloak | 2023-11-07 | 5.4 Medium |
| A vulnerability was found in all versions of Keycloak where, the pages on the Admin Console area of the application are completely missing general HTTP security headers in HTTP-responses. This does not directly lead to a security issue, yet it might aid attackers in their efforts to exploit other problems. The flaws unnecessarily make the servers more prone to Clickjacking, channel downgrade attacks and other similar client-based attack vectors. | ||||
| CVE-2018-7685 | 1 Opensuse | 1 Libzypp | 2023-11-07 | N/A |
| The decoupled download and installation steps in libzypp before 17.5.0 could lead to a corrupted RPM being left in the cache, where a later call would not display the corrupted RPM warning and allow installation, a problem caused by malicious warnings only displayed during download. | ||||
| CVE-2018-1275 | 2 Oracle, Vmware | 19 Application Testing Suite, Big Data Discovery, Communications Converged Application Server and 16 more | 2023-11-07 | 9.8 Critical |
| Spring Framework, versions 5.0 prior to 5.0.5 and versions 4.3 prior to 4.3.16 and older unsupported versions, allow applications to expose STOMP over WebSocket endpoints with a simple, in-memory STOMP broker through the spring-messaging module. A malicious user (or attacker) can craft a message to the broker that can lead to a remote code execution attack. This CVE addresses the partial fix for CVE-2018-1270 in the 4.3.x branch of the Spring Framework. | ||||
| CVE-2018-1270 | 4 Debian, Oracle, Redhat and 1 more | 28 Debian Linux, Application Testing Suite, Big Data Discovery and 25 more | 2023-11-07 | 9.8 Critical |
| Spring Framework, versions 5.0 prior to 5.0.5 and versions 4.3 prior to 4.3.15 and older unsupported versions, allow applications to expose STOMP over WebSocket endpoints with a simple, in-memory STOMP broker through the spring-messaging module. A malicious user (or attacker) can craft a message to the broker that can lead to a remote code execution attack. | ||||
| CVE-2016-8614 | 1 Redhat | 1 Ansible | 2023-11-07 | N/A |
| A flaw was found in Ansible before version 2.2.0. The apt_key module does not properly verify key fingerprints, allowing remote adversary to create an OpenPGP key which matches the short key ID and inject this key instead of the correct key. | ||||
| CVE-2023-4501 | 1 Microfocus | 5 Cobol Server, Enterprise Developer, Enterprise Server and 2 more | 2023-09-19 | 9.8 Critical |
| User authentication with username and password credentials is ineffective in OpenText (Micro Focus) Visual COBOL, COBOL Server, Enterprise Developer, and Enterprise Server (including product variants such as Enterprise Test Server), versions 7.0 patch updates 19 and 20, 8.0 patch updates 8 and 9, and 9.0 patch update 1, when LDAP-based authentication is used with certain configurations. When the vulnerability is active, authentication succeeds with any valid username, regardless of whether the password is correct; it may also succeed with an invalid username (and any password). This allows an attacker with access to the product to impersonate any user. Mitigations: The issue is corrected in the upcoming patch update for each affected product. Product overlays and workaround instructions are available through OpenText Support. The vulnerable configurations are believed to be uncommon. Administrators can test for the vulnerability in their installations by attempting to sign on to a Visual COBOL or Enterprise Server component such as ESCWA using a valid username and incorrect password. | ||||
| CVE-2023-3266 | 1 Cyberpower | 1 Powerpanel Server | 2023-08-22 | 9.8 Critical |
| A non-feature complete authentication mechanism exists in the production application allowing an attacker to bypass all authentication checks if LDAP authentication is selected.An unauthenticated attacker can leverage this vulnerability to log in to the CypberPower PowerPanel Enterprise as an administrator by selecting LDAP authentication from a hidden HTML combo box. Successful exploitation of this vulnerability also requires the attacker to know at least one username on the device, but any password will authenticate successfully. | ||||
| CVE-2023-39403 | 1 Huawei | 2 Emui, Harmonyos | 2023-08-17 | 9.1 Critical |
| Parameter verification vulnerability in the installd module. Successful exploitation of this vulnerability may cause sandbox files to be read and written without authorization. | ||||
| CVE-2023-28113 | 1 Russh Project | 1 Russh | 2023-03-23 | 5.9 Medium |
| russh is a Rust SSH client and server library. Starting in version 0.34.0 and prior to versions 0.36.2 and 0.37.1, Diffie-Hellman key validation is insufficient, which can lead to insecure shared secrets and therefore breaks confidentiality. Connections between a russh client and server or those of a russh peer with some other misbehaving peer are most likely to be problematic. These may vulnerable to eavesdropping. Most other implementations reject such keys, so this is mainly an interoperability issue in such a case. This issue is fixed in versions 0.36.2 and 0.37.1 | ||||