Total
155 CVE
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2022-24706 | 1 Apache | 1 Couchdb | 2023-11-07 | 9.8 Critical |
| In Apache CouchDB prior to 3.2.2, an attacker can access an improperly secured default installation without authenticating and gain admin privileges. The CouchDB documentation has always made recommendations for properly securing an installation, including recommending using a firewall in front of all CouchDB installations. | ||||
| CVE-2021-34795 | 1 Cisco | 10 Catalyst Pon Switch Cgp-ont-1p, Catalyst Pon Switch Cgp-ont-1p Firmware, Catalyst Pon Switch Cgp-ont-4p and 7 more | 2023-11-07 | 9.8 Critical |
| Multiple vulnerabilities in the web-based management interface of the Cisco Catalyst Passive Optical Network (PON) Series Switches Optical Network Terminal (ONT) could allow an unauthenticated, remote attacker to perform the following actions: Log in with a default credential if the Telnet protocol is enabled Perform command injection Modify the configuration For more information about these vulnerabilities, see the Details section of this advisory. | ||||
| CVE-2018-10989 | 1 Commscope | 2 Arris Tg1682g, Arris Tg1682g Firmware | 2023-11-07 | 6.6 Medium |
| Arris Touchstone Telephony Gateway TG1682G 9.1.103J6 devices are distributed by some ISPs with a default password of "password" for the admin account that is used over an unencrypted http://192.168.0.1 connection, which might allow remote attackers to bypass intended access restrictions by leveraging access to the local network. NOTE: one or more user's guides distributed by ISPs state "At a minimum, you should set a login password." | ||||
| CVE-2023-27516 | 1 Softether | 1 Vpn | 2023-10-18 | 7.8 High |
| An authentication bypass vulnerability exists in the CiRpcAccepted() functionality of SoftEther VPN 4.41-9782-beta and 5.01.9674. A specially crafted network packet can lead to unauthorized access. An attacker can send a network request to trigger this vulnerability. | ||||
| CVE-2023-1618 | 1 Mitsubishielectric | 2 Melsec Ws0-geth00200, Melsec Ws0-geth00200 Firmware | 2023-08-23 | 8.6 High |
| Active Debug Code vulnerability in Mitsubishi Electric Corporation MELSEC WS Series WS0-GETH00200 Serial number 2310 **** and prior allows a remote unauthenticated attacker to bypass authentication and illegally log into the affected module by connecting to it via telnet which is hidden function and is enabled by default when shipped from the factory. As a result, a remote attacker with unauthorized login can reset the module, and if certain conditions are met, he/she can disclose or tamper with the module's configuration or rewrite the firmware. | ||||
| CVE-2023-35689 | 1 Google | 1 Android | 2023-08-22 | 7.8 High |
| In checkDebuggingDisallowed of DeviceVersionFragment.java, there is a possible way to access adb before SUW completion due to an insecure default value. This could lead to local escalation of privilege with no additional execution privileges needed. User interaction is not needed for exploitation. | ||||
| CVE-2022-2196 | 2 Debian, Linux | 2 Debian Linux, Linux Kernel | 2023-08-18 | 8.8 High |
| A regression exists in the Linux Kernel within KVM: nVMX that allowed for speculative execution attacks. L2 can carry out Spectre v2 attacks on L1 due to L1 thinking it doesn't need retpolines or IBPB after running L2 due to KVM (L0) advertising eIBRS support to L1. An attacker at L2 with code execution can execute code on an indirect branch on the host machine. We recommend upgrading to Kernel 6.2 or past commit 2e7eab81425a | ||||
| CVE-2022-25568 | 1 Motioneye Project | 1 Motioneye | 2023-08-08 | 7.5 High |
| MotionEye v0.42.1 and below allows attackers to access sensitive information via a GET request to /config/list. To exploit this vulnerability, a regular user password must be unconfigured. | ||||
| CVE-2023-3485 | 1 Temporal | 1 Temporal | 2023-07-07 | 3.6 Low |
| Insecure defaults in open-source Temporal Server before version 1.20 on all platforms allows an attacker to craft a task token with access to a namespace other than the one specified in the request. Creation of this task token must be done outside of the normal Temporal server flow. It requires the namespace UUID and information from the workflow history for the target namespace. Under these conditions, it is possible to interfere with pending tasks in other namespaces, such as marking a task failed or completed. If a task is targeted for completion by the attacker, the targeted namespace must also be using the same data converter configuration as the initial, valid, namespace for the task completion payload to be decoded by workers in the target namespace. | ||||
| CVE-2022-47194 | 1 Ghost | 1 Ghost | 2023-06-27 | 5.4 Medium |
| An insecure default vulnerability exists in the Post Creation functionality of Ghost Foundation Ghost 5.9.4. Default installations of Ghost allow non-administrator users to inject arbitrary Javascript in posts, which allow privilege escalation to administrator via XSS. To trigger this vulnerability, an attacker can send an HTTP request to inject Javascript in a post to trick an administrator into visiting the post.A stored XSS vulnerability exists in the `twitter` field for a user. | ||||
| CVE-2022-47196 | 1 Ghost | 1 Ghost | 2023-06-23 | 5.4 Medium |
| An insecure default vulnerability exists in the Post Creation functionality of Ghost Foundation Ghost 5.9.4. Default installations of Ghost allow non-administrator users to inject arbitrary Javascript in posts, which allow privilege escalation to administrator via XSS. To trigger this vulnerability, an attacker can send an HTTP request to inject Javascript in a post to trick an administrator into visiting the post.A stored XSS vulnerability exists in the `codeinjection_head` for a post. | ||||
| CVE-2023-33949 | 1 Liferay | 2 Digital Experience Platform, Liferay Portal | 2023-05-31 | 7.5 High |
| In Liferay Portal 7.3.0 and earlier, and Liferay DXP 7.2 and earlier the default configuration does not require users to verify their email address, which allows remote attackers to create accounts using fake email addresses or email addresses which they don't control. The portal property `company.security.strangers.verify` should be set to true. | ||||
| CVE-2023-31101 | 1 Apache | 1 Inlong | 2023-05-27 | 6.5 Medium |
| Insecure Default Initialization of Resource Vulnerability in Apache Software Foundation Apache InLong.This issue affects Apache InLong: from 1.5.0 through 1.6.0. Users registered in InLong who joined later can see deleted users' data. Users are advised to upgrade to Apache InLong's 1.7.0 or cherry-pick https://github.com/apache/inlong/pull/7836 https://github.com/apache/inlong/pull/7836 to solve it. | ||||
| CVE-2019-1950 | 1 Cisco | 34 1100-4p Integrated Services Router, 1100-8p Integrated Services Router, 1101-4p Integrated Services Router and 31 more | 2023-05-22 | 8.4 High |
| A vulnerability in Cisco IOS XE SD-WAN Software could allow an unauthenticated, local attacker to gain unauthorized access to an affected device. The vulnerability is due to the existence of default credentials within the default configuration of an affected device. An attacker who has access to an affected device could log in with elevated privileges. A successful exploit could allow the attacker to take complete control of the device. This vulnerability affects Cisco devices that are running Cisco IOS XE SD-WAN Software releases 16.11 and earlier. | ||||
| CVE-2022-40468 | 1 Tinyproxy Project | 1 Tinyproxy | 2023-05-21 | 7.5 High |
| Potential leak of left-over heap data if custom error page templates containing special non-standard variables are used. Tinyproxy commit 84f203f and earlier use uninitialized buffers in process_request() function. | ||||
| CVE-2023-28978 | 1 Juniper | 1 Junos Os Evolved | 2023-05-02 | 5.3 Medium |
| An Insecure Default Initialization of Resource vulnerability in Juniper Networks Junos OS Evolved allows an unauthenticated, network based attacker to read certain confidential information. In the default configuration it is possible to read confidential information about locally configured (administrative) users of the affected system. This issue affects Juniper Networks Junos OS Evolved: All versions prior to 20.4R3-S7-EVO on pending commit???; 21.1-EVO versions prior to 21.1R3-S4-EVO on awaiting build; 21.4-EVO versions prior to 21.4R3-S1-EVO; 22.2-EVO versions prior to 22.2R3-EVO; 21.2-EVO versions prior to 21.2R3-S5-EVO on pending commit???; 21.3-EVO version 21.3R1-EVO and later versions; 22.1-EVO version 22.1R1-EVO and later versions; 22.2-EVO versions prior to 22.2R2-S1-EVO. | ||||
| CVE-2018-10968 | 2 D-link, Dlink | 4 Dir-550a Firmware, Dir-604m Firmware, Dir-550a and 1 more | 2023-04-26 | N/A |
| On D-Link DIR-550A and DIR-604M devices through v2.10KR, a malicious user can use a default TELNET account to get unauthorized access to vulnerable devices, aka a backdoor access vulnerability. | ||||
| CVE-2021-35535 | 1 Hitachienergy | 6 Relion 650, Relion 650 Firmware, Relion 670 and 3 more | 2023-04-19 | 8.1 High |
| Insecure Boot Image vulnerability in Hitachi Energy Relion Relion 670/650/SAM600-IO series allows an attacker who manages to get access to the front network port and to cause a reboot sequences of the device may exploit the vulnerability, where there is a tiny time gap during the booting process where an older version of VxWorks is loaded prior to application firmware booting, could exploit the vulnerability in the older version of VxWorks and cause a denial-of-service on the product. This issue affects: Hitachi Energy Relion 670 Series 2.2.2 all revisions; 2.2.3 versions prior to 2.2.3.3. Hitachi Energy Relion 670/650 Series 2.2.0 all revisions; 2.2.4 all revisions. Hitachi Energy Relion 670/650/SAM600-IO 2.2.1 all revisions. | ||||
| CVE-2022-48432 | 1 Jetbrains | 1 Intellij Idea | 2023-04-01 | 8.8 High |
| In JetBrains IntelliJ IDEA before 2023.1 the bundled version of Chromium wasn't sandboxed. | ||||
| CVE-2022-1278 | 1 Redhat | 8 Amq, Amq Online, Integration Camel K and 5 more | 2023-03-22 | 7.5 High |
| A flaw was found in WildFly, where an attacker can see deployment names, endpoints, and any other data the trace payload may contain. | ||||