Filtered by vendor Cisco
Subscriptions
Filtered by product Nexus 93128tx
Subscriptions
Total
95 CVE
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2021-1229 | 1 Cisco | 86 Mds 9148s, Mds 9250i, Mds 9706 and 83 more | 2023-11-07 | 5.3 Medium |
| A vulnerability in ICMP Version 6 (ICMPv6) processing in Cisco NX-OS Software could allow an unauthenticated, remote attacker to cause a slow system memory leak, which over time could lead to a denial of service (DoS) condition. This vulnerability is due to improper error handling when an IPv6-configured interface receives a specific type of ICMPv6 packet. An attacker could exploit this vulnerability by sending a sustained rate of crafted ICMPv6 packets to a local IPv6 address on a targeted device. A successful exploit could allow the attacker to cause a system memory leak in the ICMPv6 process on the device. As a result, the ICMPv6 process could run out of system memory and stop processing traffic. The device could then drop all ICMPv6 packets, causing traffic instability on the device. Restoring device functionality would require a device reboot. | ||||
| CVE-2021-1228 | 1 Cisco | 41 Nexus 9000v, Nexus 92160yc-x, Nexus 92300yc and 38 more | 2023-11-07 | 6.5 Medium |
| A vulnerability in the fabric infrastructure VLAN connection establishment of Cisco Nexus 9000 Series Fabric Switches in Application Centric Infrastructure (ACI) Mode could allow an unauthenticated, adjacent attacker to bypass security validations and connect an unauthorized server to the infrastructure VLAN. This vulnerability is due to insufficient security requirements during the Link Layer Discovery Protocol (LLDP) setup phase of the infrastructure VLAN. An attacker could exploit this vulnerability by sending a crafted LLDP packet on the adjacent subnet to an affected device. A successful exploit could allow the attacker to connect an unauthorized server to the infrastructure VLAN, which is highly privileged. With a connection to the infrastructure VLAN, the attacker can make unauthorized connections to Cisco Application Policy Infrastructure Controller (APIC) services or join other host endpoints. | ||||
| CVE-2020-3504 | 1 Cisco | 108 Firepower 1010, Firepower 1120, Firepower 1140 and 105 more | 2023-11-07 | 3.3 Low |
| A vulnerability in the local management (local-mgmt) CLI of Cisco UCS Manager Software could allow an authenticated, local attacker to cause a denial of service (DoS) condition on an affected device. The vulnerability is due to improper handling of CLI command parameters. An attacker could exploit this vulnerability by executing specific commands on the local-mgmt CLI on an affected device. A successful exploit could allow the attacker to cause internal system processes to fail to terminate properly, which could result in a buildup of stuck processes and lead to slowness in accessing the UCS Manager CLI and web UI. A sustained attack may result in a restart of internal UCS Manager processes and a temporary loss of access to the UCS Manager CLI and web UI. | ||||
| CVE-2019-1780 | 1 Cisco | 92 Firepower 4110, Firepower 4115, Firepower 4120 and 89 more | 2023-04-20 | 6.7 Medium |
| A vulnerability in the CLI of Cisco FXOS Software and Cisco NX-OS Software could allow an authenticated, local attacker with administrator credentials to execute arbitrary commands on the underlying operating system of an affected device with elevated privileges. The vulnerability is due to insufficient validation of arguments passed to certain CLI commands. An attacker could exploit this vulnerability by including malicious input as the argument of an affected command. A successful exploit could allow the attacker to execute arbitrary commands on the underlying operating system with elevated privileges. An attacker would need valid administrator credentials to exploit this vulnerability. NX-OS versions prior to 8.3(1) are affected. NX-OS versions prior to 8.3(1) are affected. | ||||
| CVE-2018-0311 | 1 Cisco | 84 Firepower 4110, Firepower 4120, Firepower 4140 and 81 more | 2023-04-20 | N/A |
| A vulnerability in the Cisco Fabric Services component of Cisco FXOS Software and Cisco NX-OS Software could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. The vulnerability exists because the affected software insufficiently validates Cisco Fabric Services packets when the software processes packet data. An attacker could exploit this vulnerability by sending a maliciously crafted Cisco Fabric Services packet to an affected device. A successful exploit could allow the attacker to cause a buffer overflow condition on the device, which could cause process crashes and result in a DoS condition on the device. This vulnerability affects Firepower 4100 Series Next-Generation Firewalls, Firepower 9300 Security Appliance, MDS 9000 Series Multilayer Switches, Nexus 2000 Series Fabric Extenders, Nexus 3000 Series Switches, Nexus 3500 Platform Switches, Nexus 5500 Platform Switches, Nexus 5600 Platform Switches, Nexus 6000 Series Switches, Nexus 7000 Series Switches, Nexus 7700 Series Switches, Nexus 9000 Series Switches in standalone NX-OS mode, Nexus 9500 R-Series Line Cards and Fabric Modules, UCS 6100 Series Fabric Interconnects, UCS 6200 Series Fabric Interconnects, UCS 6300 Series Fabric Interconnects. Cisco Bug IDs: CSCvd69960, CSCve02463, CSCve04859, CSCve41530, CSCve41537, CSCve41541, CSCve41557. | ||||
| CVE-2018-0310 | 1 Cisco | 84 Firepower 4110, Firepower 4120, Firepower 4140 and 81 more | 2023-04-20 | N/A |
| A vulnerability in the Cisco Fabric Services component of Cisco FXOS Software and Cisco NX-OS Software could allow an unauthenticated, remote attacker to obtain sensitive information from memory or cause a denial of service (DoS) condition on the affected product. The vulnerability exists because the affected software insufficiently validates header values in Cisco Fabric Services packets. An attacker could exploit this vulnerability by sending a crafted Cisco Fabric Services packet to an affected device. A successful exploit could allow the attacker to cause a buffer overread condition, which could allow the attacker to obtain sensitive information from memory or cause a DoS condition on the affected product. This vulnerability affects Firepower 4100 Series Next-Generation Firewalls, Firepower 9300 Security Appliance, MDS 9000 Series Multilayer Switches, Nexus 2000 Series Fabric Extenders, Nexus 3000 Series Switches, Nexus 3500 Platform Switches, Nexus 5500 Platform Switches, Nexus 5600 Platform Switches, Nexus 6000 Series Switches, Nexus 7000 Series Switches, Nexus 7700 Series Switches, Nexus 9000 Series Switches in standalone NX-OS mode, Nexus 9500 R-Series Line Cards and Fabric Modules, UCS 6100 Series Fabric Interconnects, UCS 6200 Series Fabric Interconnects, UCS 6300 Series Fabric Interconnects. Cisco Bug IDs: CSCvd69957, CSCve02435, CSCve04859, CSCve41536, CSCve41538, CSCve41559. | ||||
| CVE-2020-3517 | 1 Cisco | 98 Firepower 4110, Firepower 4112, Firepower 4115 and 95 more | 2023-04-20 | 8.6 High |
| A vulnerability in the Cisco Fabric Services component of Cisco FXOS Software and Cisco NX-OS Software could allow an unauthenticated attacker to cause process crashes, which could result in a denial of service (DoS) condition on an affected device. The attack vector is configuration dependent and could be remote or adjacent. For more information about the attack vector, see the Details section of this advisory. The vulnerability is due to insufficient error handling when the affected software parses Cisco Fabric Services messages. An attacker could exploit this vulnerability by sending malicious Cisco Fabric Services messages to an affected device. A successful exploit could allow the attacker to cause a reload of an affected device, which could result in a DoS condition. | ||||
| CVE-2019-1779 | 1 Cisco | 90 Firepower 4110, Firepower 4112, Firepower 4115 and 87 more | 2023-04-20 | 6.7 Medium |
| A vulnerability in the CLI of Cisco FXOS Software and Cisco NX-OS Software could allow an authenticated, local attacker to execute arbitrary commands on the underlying operating system of an affected device with elevated privileges. The vulnerability is due to insufficient validation of arguments passed to certain CLI commands. An attacker could exploit this vulnerability by including malicious input as the argument of an affected command. A successful exploit could allow the attacker to execute arbitrary commands on the underlying operating system with elevated privileges. An attacker would need valid device credentials to exploit this vulnerability. | ||||
| CVE-2018-0303 | 1 Cisco | 84 Firepower 4110, Firepower 4120, Firepower 4140 and 81 more | 2023-04-20 | N/A |
| A vulnerability in the Cisco Discovery Protocol component of Cisco FXOS Software and Cisco NX-OS Software could allow an unauthenticated, adjacent attacker to execute arbitrary code as root or cause a denial of service (DoS) condition on the affected device. The vulnerability exists because of insufficiently validated Cisco Discovery Protocol packet headers. An attacker could exploit this vulnerability by sending a crafted Cisco Discovery Protocol packet to a Layer 2 adjacent affected device. A successful exploit could allow the attacker to cause a buffer overflow that could allow the attacker to execute arbitrary code as root or cause a DoS condition on the affected device. This vulnerability affects the following if configured to use Cisco Discovery Protocol: Firepower 4100 Series Next-Generation Firewalls, Firepower 9300 Security Appliance, MDS 9000 Series Multilayer Switches, Nexus 1000V Series Switches, Nexus 1100 Series Cloud Services Platforms, Nexus 2000 Series Fabric Extenders, Nexus 3000 Series Switches, Nexus 3500 Platform Switches, Nexus 5500 Platform Switches, Nexus 5600 Platform Switches, Nexus 6000 Series Switches, Nexus 7000 Series Switches, Nexus 7700 Series Switches, Nexus 9000 Series Fabric Switches in Application Centric Infrastructure (ACI) mode, Nexus 9000 Series Switches in standalone NX-OS mode, Nexus 9500 R-Series Line Cards and Fabric Modules, UCS 6100 Series Fabric Interconnects, UCS 6200 Series Fabric Interconnects, UCS 6300 Series Fabric Interconnects. Cisco Bug IDs: CSCvc22202, CSCvc22205, CSCvc22208, CSCvc88078, CSCvc88150, CSCvc88159, CSCvc88162, CSCvc88167. | ||||
| CVE-2019-1734 | 1 Cisco | 94 Firepower 4110, Firepower 4112, Firepower 4115 and 91 more | 2023-04-20 | 5.5 Medium |
| A vulnerability in the implementation of a CLI diagnostic command in Cisco FXOS Software and Cisco NX-OS Software could allow an authenticated, local attacker to view sensitive system files that should be restricted. The attacker could use this information to conduct additional reconnaissance attacks. The vulnerability is due to incomplete role-based access control (RBAC) verification. An attacker could exploit this vulnerability by authenticating to the device and issuing a specific CLI diagnostic command with crafted user-input parameters. An exploit could allow the attacker to perform an arbitrary read of a file on the device, and the file may contain sensitive information. The attacker needs valid device credentials to exploit this vulnerability. | ||||
| CVE-2018-0294 | 1 Cisco | 75 Firepower 4110, Firepower 4120, Firepower 4140 and 72 more | 2023-04-20 | N/A |
| A vulnerability in the write-erase feature of Cisco FXOS Software and Cisco NX-OS Software could allow an authenticated, local attacker to configure an unauthorized administrator account for an affected device. The vulnerability exists because the affected software does not properly delete sensitive files when certain CLI commands are used to clear the device configuration and reload a device. An attacker could exploit this vulnerability by logging into an affected device as an administrative user and configuring an unauthorized account for the device. The account would not require a password for authentication and would be accessible only via a Secure Shell (SSH) connection to the device. A successful exploit could allow the attacker to configure an unauthorized account that has administrative privileges, does not require a password for authentication, and does not appear in the running configuration or the audit logs for the affected device. This vulnerability affects Firepower 4100 Series Next-Generation Firewalls, Firepower 9300 Security Appliance, Nexus 1000V Series Switches, Nexus 1100 Series Cloud Services Platforms, Nexus 2000 Series Fabric Extenders, Nexus 3500 Platform Switches, Nexus 4000 Series Switches, Nexus 5500 Platform Switches, Nexus 5600 Platform Switches, Nexus 6000 Series Switches, UCS 6100 Series Fabric Interconnects, UCS 6200 Series Fabric Interconnects, UCS 6300 Series Fabric Interconnects. Cisco Bug IDs: CSCvd13993, CSCvd34845, CSCvd34857, CSCvd34862, CSCvd34879, CSCve35753. | ||||
| CVE-2020-3120 | 1 Cisco | 144 Asr 9000v, Asr 9001, Asr 9006 and 141 more | 2023-04-20 | 6.5 Medium |
| A vulnerability in the Cisco Discovery Protocol implementation for Cisco FXOS Software, Cisco IOS XR Software, and Cisco NX-OS Software could allow an unauthenticated, adjacent attacker to cause a reload of an affected device, resulting in a denial of service (DoS) condition. The vulnerability is due to a missing check when the affected software processes Cisco Discovery Protocol messages. An attacker could exploit this vulnerability by sending a malicious Cisco Discovery Protocol packet to an affected device. A successful exploit could allow the attacker to exhaust system memory, causing the device to reload. Cisco Discovery Protocol is a Layer 2 protocol. To exploit this vulnerability, an attacker must be in the same broadcast domain as the affected device (Layer 2 adjacent). | ||||
| CVE-2020-3172 | 1 Cisco | 107 Firepower 4110, Firepower 4115, Firepower 4120 and 104 more | 2023-04-20 | 8.8 High |
| A vulnerability in the Cisco Discovery Protocol feature of Cisco FXOS Software and Cisco NX-OS Software could allow an unauthenticated, adjacent attacker to execute arbitrary code as root or cause a denial of service (DoS) condition on an affected device. The vulnerability exists because of insufficiently validated Cisco Discovery Protocol packet headers. An attacker could exploit this vulnerability by sending a crafted Cisco Discovery Protocol packet to a Layer 2-adjacent affected device. A successful exploit could allow the attacker to cause a buffer overflow that could allow the attacker to execute arbitrary code as root or cause a DoS condition on the affected device. Note: Cisco Discovery Protocol is a Layer 2 protocol. To exploit this vulnerability, an attacker must be in the same broadcast domain as the affected device (Layer 2 adjacent). Note: This vulnerability is different from the following Cisco FXOS and NX-OS Software Cisco Discovery Protocol vulnerabilities that Cisco announced on Feb. 5, 2020: Cisco FXOS, IOS XR, and NX-OS Software Cisco Discovery Protocol Denial of Service Vulnerability and Cisco NX-OS Software Cisco Discovery Protocol Remote Code Execution Vulnerability. | ||||
| CVE-2018-0331 | 1 Cisco | 78 Firepower 4110, Firepower 4120, Firepower 4140 and 75 more | 2023-04-20 | 6.5 Medium |
| A vulnerability in the Cisco Discovery Protocol (formerly known as CDP) subsystem of devices running, or based on, Cisco NX-OS Software contain a vulnerability that could allow an unauthenticated, adjacent attacker to create a denial of service (DoS) condition. The vulnerability is due to a failure to properly validate certain fields within a Cisco Discovery Protocol message prior to processing it. An attacker with the ability to submit a Cisco Discovery Protocol message designed to trigger the issue could cause a DoS condition on an affected device while the device restarts. This vulnerability affects Firepower 4100 Series Next-Generation Firewall, Firepower 9300 Security Appliance, MDS 9000 Series Multilayer Director Switches, Nexus 1000V Series Switches, Nexus 1100 Series Cloud Services Platforms, Nexus 2000 Series Switches, Nexus 3000 Series Switches, Nexus 3500 Platform Switches, Nexus 3600 Platform Switches, Nexus 5500 Platform Switches, Nexus 5600 Platform Switches, Nexus 6000 Series Switches, Nexus 7000 Series Switches, Nexus 7700 Series Switches, Nexus 9000 Series Switches in NX-OS mode, Nexus 9500 R-Series Line Cards and Fabric Modules, UCS 6100 Series Fabric Interconnects, UCS 6200 Series Fabric Interconnects, UCS 6300 Series Fabric Interconnects. Cisco Bug IDs: CSCvc89242, CSCve40943, CSCve40953, CSCve40965, CSCve40970, CSCve40978, CSCve40992, CSCve41000, CSCve41007. | ||||
| CVE-2019-1769 | 1 Cisco | 67 N9k-c9504-fm-r, N9k-c9508-fm-r, N9k-x96136yc-r and 64 more | 2023-03-24 | 6.7 Medium |
| A vulnerability in the CLI of Cisco NX-OS Software could allow an authenticated, local attacker with administrator credentials to execute arbitrary commands on the underlying Linux operating system of an attached line card with the privilege level of root. The vulnerability is due to insufficient validation of arguments passed to a specific CLI command on the affected device. An attacker could exploit this vulnerability by including malicious input as the argument of an affected command. A successful exploit could allow the attacker to execute arbitrary commands on the underlying Linux operating system of an attached line card with elevated privileges. An attacker would need valid administrator credentials to exploit this vulnerability. | ||||
| CVE-2019-1901 | 1 Cisco | 24 Nexus 93108tc-ex, Nexus 93108tc-fx, Nexus 93120tx and 21 more | 2023-03-03 | 8.8 High |
| A vulnerability in the Link Layer Discovery Protocol (LLDP) subsystem of Cisco Nexus 9000 Series Application Centric Infrastructure (ACI) Mode Switch Software could allow an adjacent, unauthenticated attacker to cause a denial of service (DoS) condition or execute arbitrary code with root privileges. The vulnerability is due to improper input validation of certain type, length, value (TLV) fields of the LLDP frame header. An attacker could exploit this vulnerability by sending a crafted LLDP packet to the targeted device. A successful exploit may lead to a buffer overflow condition that could either cause a DoS condition or allow the attacker to execute arbitrary code with root privileges. Note: This vulnerability cannot be exploited by transit traffic through the device; the crafted packet must be targeted to a directly connected interface. This vulnerability affects Cisco Nexus 9000 Series Fabric Switches in ACI mode if they are running a Cisco Nexus 9000 Series ACI Mode Switch Software release prior to 13.2(7f) or any 14.x release. | ||||
| CVE-2019-1778 | 1 Cisco | 67 N9k-c9504-fm-r, N9k-c9508-fm-r, N9k-x96136yc-r and 64 more | 2023-03-01 | 6.7 Medium |
| A vulnerability in the CLI of Cisco NX-OS Software could allow an authenticated, local attacker to execute arbitrary commands on the underlying Linux operating system with the privilege level of root. The vulnerability is due to insufficient validation of arguments passed to a specific CLI command on the affected device. An attacker could exploit this vulnerability by including malicious input as the argument of an affected command. A successful exploit could allow the attacker to execute arbitrary commands on the underlying Linux operating system with elevated privileges. An attacker would need valid administrator credentials to exploit this vulnerability. | ||||
| CVE-2016-6457 | 1 Cisco | 19 Application Policy Infrastructure Controller, Nexus 92160yc-x, Nexus 92304qc and 16 more | 2021-12-14 | 6.5 Medium |
| A vulnerability in the Cisco Nexus 9000 Series Platform Leaf Switches for Application Centric Infrastructure (ACI) could allow an unauthenticated, adjacent attacker to cause a denial of service (DoS) condition on the affected device. This vulnerability affects Cisco Nexus 9000 Series Leaf Switches (TOR) - ACI Mode and Cisco Application Policy Infrastructure Controller (APIC). More Information: CSCuy93241. Known Affected Releases: 11.2(2x) 11.2(3x) 11.3(1x) 11.3(2x) 12.0(1x). Known Fixed Releases: 11.2(2i) 11.2(2j) 11.2(3f) 11.2(3g) 11.2(3h) 11.2(3l) 11.3(0.236) 11.3(1j) 11.3(2i) 11.3(2j) 12.0(1r). | ||||
| CVE-2019-1804 | 1 Cisco | 26 Nexus 93108tc-ex, Nexus 93108tc-ex Firmware, Nexus 93120tx and 23 more | 2021-11-03 | 9.8 Critical |
| A vulnerability in the SSH key management for the Cisco Nexus 9000 Series Application Centric Infrastructure (ACI) Mode Switch Software could allow an unauthenticated, remote attacker to connect to the affected system with the privileges of the root user. The vulnerability is due to the presence of a default SSH key pair that is present in all devices. An attacker could exploit this vulnerability by opening an SSH connection via IPv6 to a targeted device using the extracted key materials. An exploit could allow the attacker to access the system with the privileges of the root user. This vulnerability is only exploitable over IPv6; IPv4 is not vulnerable. | ||||
| CVE-2020-3397 | 1 Cisco | 64 Nexus 3016, Nexus 3048, Nexus 3064 and 61 more | 2021-08-06 | 8.6 High |
| A vulnerability in the Border Gateway Protocol (BGP) Multicast VPN (MVPN) implementation of Cisco NX-OS Software could allow an unauthenticated, remote attacker to cause an affected device to unexpectedly reload, resulting in a denial of service (DoS) condition. The vulnerability is due to incomplete input validation of a specific type of BGP MVPN update message. An attacker could exploit this vulnerability by sending this specific, valid BGP MVPN update message to a targeted device. A successful exploit could allow the attacker to cause one of the BGP-related routing applications to restart multiple times, leading to a system-level restart. Note: The Cisco implementation of BGP accepts incoming BGP traffic from only explicitly configured peers. To exploit this vulnerability, an attacker must send a specific BGP MVPN update message over an established TCP connection that appears to come from a trusted BGP peer. To do so, the attacker must obtain information about the BGP peers in the trusted network of the affected system. | ||||